Results 1 to 3 of 3

Thread: Pika behind NAT

  1. #1
    dervish Guest

    Default Pika behind NAT

    Hello to all,

    I'm trying to get a pika warp working behind NAT, it does not seem to work very well. Used Trixbox and PIAF and that works fine behind NAT, simply putting some stuff like nat=yes; externhost=hostname, localnet=localnet/mask into the general tab of sip.conf (and offcourse do some port forwarding on the router)
    I did that with Pika, but every time when I changed sip.conf and did a reload of the config files, my changes in sip.conf are gone....
    Any idea how to deal with this?

    Best regards,


  2. #2
    dmcmorris Guest

    Default Re: Pika behind NAT

    Hey Patrick,

    I'm a little unclear on your setup... Are all your devices (phones, etc) behind the (same) NAT as the Pika? Do you use an ITSP outside of the NAT?

    Also, what is your procedure for making changes to the sip.conf (and reloading it)?


  3. #3
    dervish Guest


    Well, the problem was in the unlimitel interface Got a beta firmware that solved the issue.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts