Results 1 to 3 of 3

Thread: BRI file config for Europe and why not for France

  1. #1
    fsinetworks Guest

    Default BRI file config for Europe and why not for France

    I read this thread so as to config the pika trunk with BRI of FRANCE TELECOM :

    http://forum.pikatechnologies.com/ar...php/t-141.html

    but the structure is different , in fact in my file pika.conf :


    [digital]
    gp_group=1
    conf_ref=BRI_1_0
    briphone=false
    ;context=from-pstn
    context=from-numeris
    extension=
    accountcode=digital_grp
    callerid=asreceived
    nationalprefix=0
    internationalprefix=00
    immediate=no
    echocancel=yes
    echotaillength=64
    echosuppression=yes
    comfortnoise=yes
    echologging=no
    usecallerid=yes
    faxdetection=yes
    musiconhold=default
    language=default
    amaflags=default
    canpark=no
    txgain=0
    rxgain=0
    clippingratio=-2
    useagc=no
    agc.in.enable=no
    agc.out.enable=no
    agc.in.targetLevel=-15.0
    agc.out.targetLevel=-15.0
    agc.in.minGain=-6
    agc.out.minGain=-6
    agc.in.maxGain=18
    agc.out.maxGain=18
    agc.in.attackRate=170
    agc.out.attackRate=170
    agc.in.decayRate=750
    agc.out.decayRate=750
    agc.in.speechLevel=-36
    agc.out.speechLevel=-36
    group=1
    channels=1-2

    conf_ref=BRI_1_1
    briphone=false
    ;context=from-pstn
    context=from-numeris
    extension=
    accountcode=digital_grp
    callerid=asreceived
    nationalprefix=0
    internationalprefix=00
    immediate=no
    echocancel=yes
    echotaillength=64
    echosuppression=yes
    comfortnoise=yes
    echologging=no
    usecallerid=yes
    faxdetection=yes
    musiconhold=default
    language=default
    amaflags=default
    canpark=no
    txgain=0
    rxgain=0
    clippingratio=-2
    useagc=no
    agc.in.enable=no
    agc.out.enable=no
    agc.in.targetLevel=-15.0
    agc.out.targetLevel=-15.0
    agc.in.minGain=-6
    agc.out.minGain=-6
    agc.in.maxGain=18
    agc.out.maxGain=18
    agc.in.attackRate=170
    agc.out.attackRate=170
    agc.in.decayRate=750
    agc.out.decayRate=750
    agc.in.speechLevel=-36
    agc.out.speechLevel=-36
    group=1
    channels=3-4

    When i have an incomming call the call is on PIKA/digital/1 and PIKA/digital/4. For France TELECOM this a problem about pika warp ?
    When One bri is connected PIKA/digital/1 and PIKA/digital/2 works normaly.
    When BRI_1_0 and BRI_1_1 are connected PIKA/digital/2 and PIKA/digital/3 are OUT.
    Have you an idea ?

    Best Regards,
    Fabien

    PS: I connected an alcatel PBX on one BRI and the other one the Pika Warp, when i have an incomming call the two pbx rings !!!

  2. #2
    Join Date
    Jul 2008
    Posts
    268

    Default

    I am suspicious about the multiple 'group=1' definitions.
    I would be tempted to try the following:
    If you want all the BRI channels in one big group - comment out the first 'group=1' line.
    If you want two separate groups in a gateway fashion between provider and PBX - try changing the second 'group=1' line to 'group=2'
    But keep in mind that this is just a guess.

  3. #3
    fsinetworks Guest

    Default

    Hello,

    i added after the problem the group=1.
    However, i will comment out the first 'group=1' line.

    Best Regards,
    Fabien

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •