BRI file config for Europe and why not for France

[fsinetworks]

I read this thread so as to config the pika trunk with BRI of FRANCE TELECOM :

http://forum.pikatechnologies.com/ar...php/t-141.html

but the structure is different , in fact in my file pika.conf :


[digital]
gp_group=1
conf_ref=BRI_1_0
briphone=false
;context=from-pstn
context=from-numeris
extension=
accountcode=digital_grp
callerid=asreceived
nationalprefix=0
internationalprefix=00
immediate=no
echocancel=yes
echotaillength=64
echosuppression=yes
comfortnoise=yes
echologging=no
usecallerid=yes
faxdetection=yes
musiconhold=default
language=default
amaflags=default
canpark=no
txgain=0
rxgain=0
clippingratio=-2
useagc=no
agc.in.enable=no
agc.out.enable=no
agc.in.targetLevel=-15.0
agc.out.targetLevel=-15.0
agc.in.minGain=-6
agc.out.minGain=-6
agc.in.maxGain=18
agc.out.maxGain=18
agc.in.attackRate=170
agc.out.attackRate=170
agc.in.decayRate=750
agc.out.decayRate=750
agc.in.speechLevel=-36
agc.out.speechLevel=-36
group=1
channels=1-2

conf_ref=BRI_1_1
briphone=false
;context=from-pstn
context=from-numeris
extension=
accountcode=digital_grp
callerid=asreceived
nationalprefix=0
internationalprefix=00
immediate=no
echocancel=yes
echotaillength=64
echosuppression=yes
comfortnoise=yes
echologging=no
usecallerid=yes
faxdetection=yes
musiconhold=default
language=default
amaflags=default
canpark=no
txgain=0
rxgain=0
clippingratio=-2
useagc=no
agc.in.enable=no
agc.out.enable=no
agc.in.targetLevel=-15.0
agc.out.targetLevel=-15.0
agc.in.minGain=-6
agc.out.minGain=-6
agc.in.maxGain=18
agc.out.maxGain=18
agc.in.attackRate=170
agc.out.attackRate=170
agc.in.decayRate=750
agc.out.decayRate=750
agc.in.speechLevel=-36
agc.out.speechLevel=-36
group=1
channels=3-4

When i have an incomming call the call is on PIKA/digital/1 and PIKA/digital/4. For France TELECOM this a problem about pika warp ?
When One bri is connected PIKA/digital/1 and PIKA/digital/2 works normaly.
When BRI_1_0 and BRI_1_1 are connected PIKA/digital/2 and PIKA/digital/3 are OUT.
Have you an idea ?

Best Regards,
Fabien

PS: I connected an alcatel PBX on one BRI and the other one the Pika Warp, when i have an incomming call the two pbx rings !!!

[mrecoskie]

I am suspicious about the multiple 'group=1' definitions.
I would be tempted to try the following:
If you want all the BRI channels in one big group - comment out the first 'group=1' line.
If you want two separate groups in a gateway fashion between provider and PBX - try changing the second 'group=1' line to 'group=2'
But keep in mind that this is just a guess.

[fsinetworks]

Hello,

i added after the problem the group=1.
However, i will comment out the first 'group=1' line.

Best Regards,
Fabien