Results 1 to 1 of 1

Thread: Software Release - WARP 2.2.6 Patch

  1. #1
    skar Guest

    Default Software Release - WARP 2.2.6 Patch

    ************************************************** *******************
    * PIKA Warp 2.2.6 Engineering Build Readme File *
    ************************************************** *******************


    The files in this patch have been tested by the R&D department
    to verify issue resolution and general sanity only.


    PATCH REQUIREMENTS: SDK 2.8.14, chan_pika 3.8.8

    REASON FOR RELEASE: See issues resolved below.


    FILES AFFECTED: The following packages have changed:
    - chan_gsm
    - gettext
    - libxml
    - php
    - hmp
    - grandprix
    - chan_pika

    Requires build and re-flash of persistent and ramdisk

    COMMENTS: Combines SDK 2.8.14 and chan_pika 3.8.8


    --------------- Issues resolved in PADS 2.2.6 -----------------------

    8425: GSM module resends SMS indefinitely

    - A maximum number of retries has been added to limit the re-sending attempts.
    The maximum number of retries can be configured using the "sms_send_retry" configuration
    key. This default value is 5.
    Note: The SMSSuccess and SMSError Asterisk Manager events have been added to report
    success or failure to send the SMS.

    8510: chan_pika fails to compile in PADS 2.2.5 when using CentOS 5

    - Additional checks have been added to the GrandPrix makefile to avoid building inapplicable steps.

    8538: make clean fails because of typo

    - Removed unneccessary characters from the Makefile

    8540: php fails to compile

    - Various changes have been made to clean up dependencies.

    8655: php is not properly installed

    - The line that performs the link in the PHPWEB version has been corrected and the PHP version information
    has been added to the file.

    --------------- Issues resolved in SDK 2.8.14 -----------------------

    8554 (GP): ICMP responses are generated for incoming RTP audio packets

    - The RTP receive socket is opened as soon as the initial INVITE is sent out.
    This action prevents the operating system from generating ICMP messages in
    the case were RTP packets are immediately received.

    8686 (GP): SIP user agents failed to re-register

    - Proper handling of verious 4xx/5xx responses has been added to allow
    user agents to re-attempt registration.

    8687 (GP): Failure to authenticate multiple requests in one session

    - The authentication state flag is now cleared after each authentication request
    allowing a BYE request to be authenticated after the initial INVITE was challenged.

    8559 (AoH): An error is not reported if a fax is not properly received

    - If no pages are exchanged, the result value will be set to PKH_FAX_RESULT_PROTOCOL_ERROR,
    with a last error value of PKH_FAX_LASTERROR_NO_PAGES_EXCHANGED.

    8722 (AoH): Starting the RTP receive socket may cause a segfault

    - The RTP receive and transmit sockets are created at the same time, however only the receive
    side is started.

    --------------- Issues resolved in SDK 2.8.13 ---------------

    8569 (GP): BYE requests are not authenticated when requested by SIP proxy

    - Proper handling of the "407 Proxy Authentication Required" response to a BYE
    request has been added to GrandPrix. REGISTER, INVITE, and BYE requests are
    now properly authenticated.

    8519 (AoH): Pikalm does not properly report server side errors

    - Pikalm has been updated to report server side errors with the code
    received. The default error message is not longer used when server
    side errors occur.

    8599 (AoH): BYE requests are not authenticated when requested by SIP proxy

    - Proper handling of the "407 Proxy Authentication Required" response to a BYE
    request has been added to AoH allowing the user application to retransmit the
    BYE message with the authentication information requested.

    --------------- Issues resolved in SDK 2.8.12 ---------------

    8479 (GP): Losing low-level dialogs when issuing a 4xx response after sending a 180 RINGING

    - After the ACK message is received from the remote agent, the low-level dialog
    associated with the call is cleaned up and removed. Failure to remove these dialogs
    results in unneccesary memory usage that will only be deallocated when the application
    is terminated.

    8506 (AoH): Settings phone gains through AoH does not work properly.

    - Proper audio configuration is now performed when the FXS interface is created.
    These changes ensure any gain values are cleared when the FXS interface is
    closed and re-opened and allow changes to be made before the interface is started.

    8527 (AoH): Name server values that are commented out may be used if they are listed in the
    resolv.conf file before the desired sever values.

    - All commented lines found in the resolv.conf file are skipped.


    For support issues, phone or e-mail our Customer Care department
    at the following:

    Tel: +1-613-591-1555
    FAX: +1-613-591-9295

    ================================================== ============
    Copyright 2008 PIKA Technologies Inc.


    PIKA is a registered trademark of PIKA Technologies Inc. All
    other trademarks, product names and company names and/or logos
    cited herein, if any, are the property of their respective


    This document is provided to you for informational purposes
    only and is believed to be accurate as of the date of its
    publication, and is subject to change without notice. PIKA
    Technologies Inc. assumes no responsibility for any errors or
    omissions in this document and shall have no obligation to you
    as a result of having made this document available to you or
    based upon the information it contains.
    ================================================== ============

    svn location:
    PADS tarball:
    Image files:
    Last edited by skar; 10-28-10 at 10:51 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts