Results 1 to 2 of 2

Thread: Need Help About "Low Density Analog Board with DSPs"

  1. #1
    Join Date
    Jun 2008
    Posts
    68

    Default Need Help About "Low Density Analog Board with DSPs"

    Hi
    I`am a .Net Programmer . My Company has a lot of this card
    and we haven`t any Driver CD and manual of this cards .
    I want to design an IVR system . Dose this card support
    .net or Not . I found a .Net sample in site but it need
    a pikagpapi.dll . I can`t find it . Please help US .

    Thank you .
    Ali

  2. #2
    Join Date
    Jun 2008
    Posts
    68

    Default Need Help About "Low Density Analog Board with DSPs"

    Hi Ali,

    SDKs can be downloaded from PIKA's website:

    http://www.pikatechnologies.com/english/View.asp?x=441

    If you are using the Low Density Analog Board with DSPs, then the SDKs you need are:
    1) PIKA Low Level API 6.5
    2) PIKA High Level API (GrandPrix) 1.3

    Install the low-level API (and restart the computer) before installing the high-level API.

    Sample configuration files for your board can be found in the following directory:
    C:\Program Files\PIKA\GrandPrix\conf\templates\aob_inline

    Copy these files into the "C:\Program Files\PIKA\GrandPrix\conf\" directory and you should be able to run the C# sample application.

    Paul

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •