Results 1 to 2 of 2

Thread: BRI Settings

  1. #1
    agauthier Guest

    Default BRI Settings

    Depending on the country you are located and the provider within that country, you may need to set the BRI configuration accordingly.

    UK with BT
    Set the following settings in the pikagp_aoh.cfg configuration file:
    addsotoend=false
    numbertype=unknown


    If you have problems with incoming/outgoing calls and your configuration is not previously listed then follow these instructions:
    1. Set the logging to persistent as per http://www.pikatechnologies.com/engl...ngtoPersistent
    2. Place both incoming and outgoing calls.
    3. Send the logs to PIKA for analysis.

  2. #2
    agauthier Guest

    Thumbs up BRI : European settings

    When configuring BRI, you should verify the following settings:

    1.Are you using point-to-point (pp) or point-to-multipoint (pmp) and set this correctly for networkconfig in file.
    2.The numbertype should almost always be set to unknown (which is not the default value).
    3.The countrycode value has more options listed in the config file than it actually accepts. It should almost always be set to europe and the only values that work are 'europe', 'france', 'uk', 'germany' and 'australia'


    Also, if things do not work, check the /etc/asterisk/pika.conf file. If the user has manually run pikacf on the WARP, the context values will be wrong so asterisk will not work.

    Code:
       
    Line Type        Pikacf Context           PADS context              FreePBX Context
    FXO               fxo                      DID_trunk_1               from-pstn
    FXS               fxs                      numberplan-custom-1       from-internal
    BRI / digital     digital                  DID_digital_1             from-pstn
    [DIGITAL_23800157]
    id=1
    ;serial=23800157
    interfacetype=bri_eu
    clockmode=slave

    [bri]
    bri0=BRI_23800157_0
    bri1=BRI_23800157_1

    [BRI_23800157_0]
    interface=board1,0
    networkconfig=pp
    switchtype=etsi
    countrycode=europe
    line_compandmode=alaw
    node=client
    numbertype=unknown
    numberplan=isdn
    channelselect=exclusive
    endpoint=true
    autoreconnect=false
    addsotoend=false
    resetchidextensionbit=false
    enablet309=false
    permanentactivation=false

    [BRI_23800157_1]
    interface=board1,1
    networkconfig=pp
    switchtype=etsi
    countrycode=europe
    line_compandmode=alaw
    node=client
    numbertype=unknown
    numberplan=isdn
    channelselect=exclusive
    endpoint=true
    autoreconnect=false
    addsotoend=false
    resetchidextensionbit=false
    enablet309=false
    permanentactivation=false

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •