Results 1 to 2 of 2

Thread: iax dual server

  1. #1
    shimaa Guest

    Default iax dual server

    hello every body,
    any one try to make IAX trunk between 2 Pika appliance using Asterisk GUI 2.1
    as I try to make it
    but the status in trunk
    unregister or request sent
    please any one know the steps to make IAX trunk without this problem
    thanks for your best effort

  2. #2
    agauthier Guest

    Default IAX communication

    Two Warp/Asterisk systems

    IAX Trunk
    IP address = xxx.xxx.xxx.34

    This Warp/Asterisk system needs to register to another Asterisk system.

    1) Invoke IAX trunk from Trunks->Voip Trunks configuration page. Add the following information.

    Edit IAX Trunk 201
    Provider Name: John
    Hostname: xxx.xxx.xxx.66
    Username: 201
    Password: iaxtrunk
    Security: no
    Codecs: u-law, a-law, none, none, none

    2) Add the following Outbound Calling Rules
    Outbound Calling Rule Name: global
    Pattern: _9X.
    Use TrunkGroup: John
    Strip _1_ digits from front


    ----------------------------------------------------
    Meanwhile, on your other Warp/Asterisk system:

    IAX Extension
    IP address = xxx.xxx.xxx.66

    System Status:
    Shows extension 201 as Type IAX User

    Add the following 201 User extension
    User Extensions -> Edit

    Edit User Extension 201
    Name: 201
    Technology: IAX (check-box)
    Codecs Preference: u-alaw, a-law, None, None, None

    VOIP Settings:
    SIP/IAX password: iaxtrunk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •