PDA

View Full Version : Making the Cisco 7942 work with the Warp Plus



mrecoskie
02-24-16, 02:51 PM
Note for making the Cisco 7942 work with the Warp Plus.


In this example, the WARP Plus with IP address 192.168.44.102, has been added as a member of the "call Manager Group." This lets the Cisco phone knows it is OK to answer calls from the WARP Plus. If it is not added to the list then the call is just ignored. A sample of this change is shown below. Also note the 'autoAnswerEnabled' field which gives options on where to direct the page (for example, speakerphone).






================================================== =======


--- SEP08CC68E994B4.cnf.xml.orig 2014-10-15 10:54:55.068973077 -0400
+++ SEP08CC68E994B4.cnf.xml.working 2014-10-15 11:01:11.772955097 -0400
@@ -25,6 +25,16 @@
<processNodeName>192.168.44.1</processNodeName>
</callManager>
</member>
+ <member priority="1">
+ <callManager>
+ <ports>
+ <ethernetPhonePort>2000</ethernetPhonePort>
+ <sipPort>5060</sipPort>
+ <securedSipPort>5061</securedSipPort>
+ </ports>
+ <processNodeName>192.168.44.102</processNodeName>
+ </callManager>
+ </member>
</members>
</callManagerGroup>
</devicePool>
@@ -100,7 +110,7 @@
<name>6003</name>
<displayName>6003</displayName>
<autoAnswer>
- <autoAnswerEnabled>2</autoAnswerEnabled>
+ <autoAnswerEnabled>1</autoAnswerEnabled>
</autoAnswer>
<callWaiting>3</callWaiting>
<authName>6003</authName>