PDA

View Full Version : How can I upgrade the board's firmware with MonteCarlo 6.7.3



brianj
01-10-14, 02:44 PM
I'm using a PrimenetMM board that have the "N" letter in the part number. I read the information about the problem with this boards and know that this issue can be solved upgrading the board's firmware using the MonteCarlo 6.7.2 or a higher version, but I really don't know how to do this? How can I upgrade the firmware using this MonteCarlo?

Thanks in advanced.

pikasupport
01-22-14, 08:45 AM
Hi Brian,


The firmware referenced in this notice is included in the driver and downloaded upon initialization of the board. So in other words it is only necessary to install and use a Montecarlo version of 6.7.2 or higher of software. No further actions are required.


\Pika Support

brianj
01-22-14, 12:38 PM
The thing is that I always install the board and then install the Montecarlo, and when you do it like this, the system crashes, and now i do it otherwise, I install the MonteCarlo and then put the board and works fine.

Thanks