PDA

View Full Version : Recovering a Warp Plus unit



mrecoskie
08-16-12, 01:16 PM
If a factory reset through the GUI does not work here is an alternate approach to recovering the software on a Warp Plus paging/MoH unit if you have physical access to the unit. Download and unzip the following file to a FAT formatted USB key:

ftp://ftp.pikatech.com/outgoing/Warp-Plus/Warp_Plus_USB_Recovery-1.4.4-3.zip


Afterwards insert the key into the Warp and reboot. This process may take a while but should ultimately factory reset the unit's software. This will wipe out any previous configuration on the unit.