pikasupport
11-14-11, 02:47 PM
WARP TECHNICAL BULLETIN - WTB0005
Date: November 14, 2011
Product(s): WARP Appliance
Reason: FXO and BRI TE incompatibility
---------------------------------------------------------------------------------------
Description:
There is a compatibility issue running BRI modules set in TE mode alongside a FXO module in the same Warp. The clock that the BRI module recovers off the digital line is not stable enough to meet the strict jitter requirements of the chip used on the FXO module. This limitation is true for all revisions of Warp hardware.
If you have any questions, please contact PIKA Support: support@pikatech.com (support@pikatech.com)
Date: November 14, 2011
Product(s): WARP Appliance
Reason: FXO and BRI TE incompatibility
---------------------------------------------------------------------------------------
Description:
There is a compatibility issue running BRI modules set in TE mode alongside a FXO module in the same Warp. The clock that the BRI module recovers off the digital line is not stable enough to meet the strict jitter requirements of the chip used on the FXO module. This limitation is true for all revisions of Warp hardware.
If you have any questions, please contact PIKA Support: support@pikatech.com (support@pikatech.com)