PDA

View Full Version : /persistent1 is 100% full.



praetorian46
05-02-11, 08:55 PM
I've searched and found the following and the link below does not describe my issue.
http://forum.pikatechnologies.com/archive/index.php/t-557.html

A "df -h" shows the following.

Filesystem Size Used Available Use% Mounted on
rootfs 91.5M 82.3M 9.2M 90% /
/dev/root 91.5M 82.3M 9.2M 90% /
/dev/mtdblock6 64.0M 38.1M 25.9M 60% /persistent
tmpfs 36.0M 52.0k 35.9M 0% /tmp
/dev/mtdblock7 64.0M 63.3M 768.0k 99% /persistent1
/dev/mtdblock8 64.0M 15.1M 48.9M 24% /persistent2
/dev/mmcblk0p1 7.4G 188.9M 6.8G 3% /mnt/sd
tmpfs 125.1M 4.0k 125.1M 0% /dev

A "du -hd 3" in /persistent1 shows the following.

0 ./var/lib/lighttpd
27.4M ./var/lib/asterisk
27.4M ./var/lib
395.0k ./var/log/pika
0 ./var/log/httpd
0 ./var/log/lighttpd
6.7M ./var/log/asterisk
7.2M ./var/log
0 ./var/run/lighttpd
0 ./var/run/asterisk
512 ./var/run
36.8M ./var/www/html
36.8M ./var/www
0 ./var/cache/php-pear
30.8M ./var/cache/php-eaccelerator
0 ./var/cache/lighttpd
30.8M ./var/cache
7.6M ./var/spool/asterisk
7.6M ./var/spool
109.8M ./var
109.8M .

It's a little puzzling because df shows that the volume is only 64M in size and du shows that I'm using 109M.
I'm not sure where to go from here.
I have an 8GB SD card installed and there isn't much on it.
I would love to relieve /persistent, /persistent1, & /persistent2 as much as possible using the SD card but I'm not sure how to do that.
Any help would be great.
Thank you,
Cody

Abner78
05-03-11, 06:06 AM
Same issue here.
I installed the italian sound set and it grew to 99% as you.

Please someone can help?

ADDENDUM : Just discovered that, when at 99%, my voicemail cannot accept any new messages. It says voicemail full. This is really annoying and a big problem. I ended up overwriting all English sounds with mine, just to recover some space and make voicemail work again.

Can someone please help?

mrecoskie
05-11-11, 08:12 AM
@Cody: Interesting observation. I wonder if 'du' is somehow counting space in RAM which could exceed the 64 MB for persistent1. This could be because of the ramdisk architecture. I think I would ultimately trust 'df'.

@Abner87: One easy way to help offload anything to the SD card is to create a symbolic link from the Warp's memory to the SD card. Here is an example to make a symlink from '/persistent1/var/log' to '/mnt/sd/log'. (Assuming '/persistent1/var/log' exists and '/mnt/sd/log' does not exist.)

Option A) To preserve existing files:


mv /persistent1/var/log /mnt/sd
ln -s /mnt/sd/log /persistent1/var


Option B) To overwrite existing files completely:


rm -fr /persistent1/var/log
mkdir /mnt/sd/log
ln -s /mnt/sd/log /persistent/var


Then once the link is in place anything copied to '/persistent1/var/log' would then end up residing on the SD card. The only risk involved with this approach is that it makes the Warp unit dependent on that particular SD card. Hope this makes sense.