View Full Version : Hardware configurations
vfadmin
07-08-08, 10:16 AM
What different hardware configurations will be available for your Appliance?
Kevin
vfadmin
07-08-08, 10:17 AM
Updated - May 13, 2010
The base unit mainboard provides an IP port as well as 1 FXS port.
There are 2 expansion ports on the warp to add additional connectivity options.
Expansion Modules:
- 4 port FXO/Trunk module with Power Failure Transfer Port
- 4 port FXS/Station module with Power Failure Transfer Port
- 2 port BRI module
- 2 port GSM module
Power Supply Options:
- Power Supply with North American cord adapter
- Power Supply with Europe cord adapter
- Power Supply with UK cord adapter
Rod
foulonneau
01-19-09, 04:51 PM
Hello
I would like to know the availability of the BRI module described here
http://www.pikatechnologies.com/english/View.asp?x=652
Features and Benefits :
.../...
4-port FXS station, 4-port FXO trunk and 2 port/ 4 channel BRI modules can be used in any combination to a maximum of 8 additional ports
.../...
I was not able to find any reference to it on pika website.
Laurent
mrecoskie
01-19-09, 04:56 PM
The BRI module will be generally available at the end of this month (January 09).
You can see more details on the BRI module at our community site www.pikawarp.org (http://www.pikawarp.org) under Hardware. (for example, http://pikawarp.org/?p=90 )
foulonneau
01-19-09, 06:18 PM
Thanks for the info
mrecoskie
05-13-10, 08:43 AM
Pika recently announced an additional 2 radio/channel GSM module (April 2010) that can be added to the list of generally available modules.
http://www.pikatechnologies.com/english/view.asp?x=498&id=121
Are there any plans for future Warp devices to ship with more than one Ethernet port? Because of the way the network infrastructure in our building is managed, we'd very much like to have the Warp function as a gateway on a private LAN for our phones, and pass all outbound / public-facing traffic through a separate WAN port.
Alternately, if this could be done through one port using VLAN tagging, this may not be necessary. I don't recall seeing very much documentation on this class of feature, however.
Powered by vBulletin® Version 4.1.10 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.